立即開始

在腳本中搜尋"volume profile"

NITS - NIFTY INTRADAY TRADING SYSTEMNSE:NIFTY Hello Traders..! This is another indicator / system to make use for NIFTY & BANK NIFTY Intra day trading. This is my Gift to the traders for this New Year 2024. Use this to your Edge and make some profits. All explained below. NIFTY INTRA-DAY TRADING SYSTEM Explanation of Arrays: ------------------------------- ## FIRST 15 MIN SESSION BOX ## From 09:15 to 09:30 where the initial orders will get collected and Auction takes place. DO NOT engage into any trade in this session. Let the Box develop. ## INITIAL HIGH / LOW FORMATION SESSION ## This session is from 09:15 to 10:30. We can observe the Initial High or Low being formed for the day, that is VALID TILL 11:30. ## NO-TRADE ZONE / ACC. AREA / DAY’S H OR L CONFIRMATION SESSION ## From 11:30 to 12:30 90% of time this is the session where the whole Day’s High or Low will get confirmed. Sometimes the market may violate this Session! DO NOT engage into any fresh trade in this area. Once the box is developed, you can see the Mid price line will be formed which is valid for the afternoon Trading session till 15:30. ## SIGNAL LINE, MIDDLE PRICE LINE, SESSION HIGH LOW LINES ## Middle Price Line – the dotted line (Red colour) is Mid Price Line for the Initial session box. This acts as an important price level for the whole day. Signal Line – the Solid line that will form after 10:30. Consider this price line as very important price line to which the price reacts with a good momentum, either break through or rejection and valid for the whole trading day. Session High Low price line – high and low prices of the Initial session box which acts as a good Support / Resistance / Target / Stop loss. Even previous session’s price lines can also be used for the current day too. ## TREND BOX ## Multi-Time frame trend box will show the real-time trend on different time frames. This box will be very helpful in trade decision. Please note that at least THREE HIGHER TIME FRAME TRENDS must be in the same direction to support your trade criteria for the better confirmation. ## VOLUME IMBALANCE ## These orange coloured boxes are very tiny imbalances between prices that were formed during price movements. Algorithm will try to fill these imbalances on its way of filling orders. These price imbalances can be used for our edge while taking trades. SOME TIPS: --------------------------- 1) Avoid Break out trades 2) Always trade the pull backs 3) Keep your Stops above / below the KEY LEVELS 4) Always follow the Higher Time frame trend while taking a trade. If you trade in 1m TF consider 5m trend If you trade in 5m TF consider 1H or 15m trend 5) Consider the higher TF closure of prices only, to validate the break out. 6) Trade what you see, market can do anything it wants. 7) Do not worry about losses. It happens and that is the business. 8) End your trading week in green no matter how big or small the profit is. Consistency is the key this business. 9) Keep in mind that the Market does two things only, either it will FILL THE GAP or GRAB THE LIQUIDITY. Just plan your trades accordingly. Liquidity levels like Previous Session / Day / Week / highs and lows. 10) The Market is a continuous business. It does not end for the specific day. It will not end its Buy or Sell model unless it completes its cycle, hence TRADE WHAT YOU SEE and not WHAT YOU THINK! 11) Unless the key swing high / low is broken and closed, DO NOT consider that move as a reversal. Consider that as a Liquidity grab. And it will continue in its previous trend. HOW TO TAKE TRADE USING NITS: (one of the Techniques) -------------------------------------------------------------------------------- As explained above, Do not engage in trade for the first 15 minutes. Once the 15m box forms then look for divergence between NIFTY and BANK NIFTY. Both Indices are supposed to trade in the same direction but at key levels and times, these instruments will make DIVERGENCE with its Highs and Lows. Ex: one Index will make LOW AND LOWER LOW and at the same time other will make LOW AND HIGHER LOW. This deflection can be used for taking Buy Trades. Ex: If the Divergence forms at the Bottom then the market will move upwards. If the Divergence forms at the Top then the market makes down move. To confirm this divergence, the price will move away from that deflected Lows or Highs. ----------------------------------- POINTS TO OBSERVE ------------------------------------ Mostly the first 15 min range that forms will either be very large candles or normal candles with rejection wicks or Shaved bar (open and H/L same) Whenever you observe a very large wide range bars within the 15min range, consider the Day’s high and Low is already formed. And the market will be hovering inside that range only. Very useful for taking 50 points scalping here and there by using the signal line and middle line or Acc box mid line. In this scenario you have three important info of the day, OPEN HIGH & LOW established already, The market will only look for its close. Ex: If the market trades with normal candles, then consider your trades in two parts. From 09:30 to 11:30 and from 12:30 to 15:30 as 11:30 to 12:30 will confirm the current day’s High / Low hence do not take a fresh position within that time. 1) Initial session trade – If the price does not break and close the 15 min range high/low, consider it is going to reverse and continue its trend till 10:30 Ex: 2) Mid session Trade – mostly the market accumulates positions and collects orders between 11:30 to 12:30 for the afternoon session. Once the session box is developed, the middle price line will form. Wait for the market breakout and close off this session’s high or low in Higher TF. The market will continue in the direction of breakout from this session and continue till 15:30. Hence wait for pull back till its mid price / high or low price lines of this Acc box and take trade in the initial breakout direction keeping stop above or below the session’s high or low. Ex: ## Fixed Range Volume Profile as a Tool ## ----------------- Note: ----------------- Kindly do not ask for any codes or script details. The one technique what I explained (Divergence method) is more than enough for making a consistent earnings. Please study and back test / forward test for yourself for atleast 2 weeks time. Every traders aspect and mindset is different in seeing the market movements. Please design your own methodology and CONSIDER this as a BUSINESS..! JUST..... Believe the System Be patient Be Disciplined & Be a Successful Earner..!! LET YOUR ENDS MEET (Hope I explained well)
Pine Script®指標
由sanjay_ramanathan提供
11
BE - Pr_DayLowHigh_BreakoutScreener AlgoHerewith presenting the Screener based indicator which supports Algo trade on the NSE stocks. The idea behind this indicator is when the Current day stock breaks out of Yesterday's high or Low with promising volumes (Using MA's and POC of Volume Profile) along with formation of candle Pattern. Initiates the Trade entries. Note: Indicator is designed to take an entry even before the candle is closed as soon as the entry level is crossed and it shall exit the trade as soon as the SL is hit even before candle is close. How to Work with this Indicator. You can map up to 15 Scripts in this indicator. However you may decide if you wish to load all 15 are few of them. if you wish to load only 10, below settings should help you ignore the rest 10 symbols from screening it for setups Updating Symbol Script. This is an important part is used for Algo trades. Read the tooltip for better understanding of the format. Acceptable format is Broker Name followed with : and space with Symbol mapping Name followed with / and Instrument token provided by broker if no token alloted for the script then you may keep 0 against symbol name followed with / and Qty in terms of absolute value or in terms of percentage. Trade and Scan Settings Symbol List Mapping For Improvements in Results - Use Events and keep a track of it / use Nudges etc.
Pine Script®指標
由TradeWiseWithEase提供
RSI Scalping & Swing Signals With AlertsThis RSI indicator shows a green or red ribbon when the smoothed RSI is bullish or bearish. It also includes a long moving average for overall trend confirmation. Wait until the ribbon holds above or below the long moving average and take positions in that direction. To get an easier to read RSI indicator, I smoothed the RSI out and paired it next to a short term RMA. These two together form the ribbon that will show you early reversals and trend direction. The long moving average is used as an overall trend detector and confirmation for longer term trends. ***HOW TO USE*** Scalping: Enter longs when the ribbon turns green and enter shorts when the ribbon turns red. Exit positions when the ribbon turns the opposite color or crosses the long moving average. Swing Trading: When the ribbon holds above the long moving average or breaks out and retests it, look for long positions and exit when the ribbon turns red or crosses the long moving average. When the ribbon holds below the long moving average or breaks down and retests it, look for short positions and exit when the ribbon turns green or crosses the long moving average. ***DETAILS*** This indicator gives early reversal signals very well and waiting for the RSI ribbon to cross the long moving average helps to get you into positions when the market is ready to really move while filtering out some of the noise. The ribbon and background will change to green or red depending on whether it is currently bullish or bearish. There is also a label that changes colors and tells you if RSI is bullish or bearish and also whether the RSI ribbon is above or below the long moving average. Green or red circles will appear on the indicator when there is a bullish or bearish cross of the RSI ribbon and the long moving average. It also has alerts that trigger when RSI is turning bullish/bearish or when the RSI ribbon is crossing the long moving average. ***CUSTOMIZATION*** Each piece of this indicator can be customized to suit your preferences including the RSI source, length, smoothing length, short moving average length and long moving average length. You can also turn off the labels, signals and long moving average. All of these settings can be managed within the indicator settings input tab. ***MARKETS*** This indicator can be used as a signal on all markets, including stocks, crypto, futures and forex. ***TIMEFRAMES*** This RSI Scalping & Swing Signals indicator can be used on all timeframes. ***TIPS*** Try using numerous indicators of ours on your chart so you can instantly see the bullish or bearish trend of multiple indicators in real time without having to analyze the data. Some of our favorites are Trend Friend Scalp & Swing Trade Signals, Volume Spike Scanner, Buy & Sell Pressure Volume Profile, and Momentum Scalper in combination with this RSI indicator. They all have real time Bullish and Bearish labels as well so you can immediately understand each indicator's trend.
Pine Script®指標
由FriendOfTheTrend提供
7
Momentum Scalping & Swing Signals With AlertsThis Momentum indicator shows a green or red ribbon when smoothed momentum is bullish or bearish. It also includes a long moving average for overall trend confirmation. Wait until the ribbon holds above or below the long moving average and take positions in that direction. To get an easier to read momentum indicator, I smoothed the momentum out and paired it next to a short term RMA. These two together form the ribbon that will show you early reversals and trend direction. The long moving average is used as an overall trend detector and confirmation for longer term trends. ***HOW TO USE*** Scalping: Enter longs when the ribbon turns green and enter shorts when the ribbon turns red. Exit positions when the ribbon turns the opposite color or crosses the long moving average. Swing Trading: When the ribbon holds above the long moving average or breaks out and retests it, look for long positions and exit when the ribbon turns red or crosses the long moving average. When the ribbon holds below the long moving average or breaks down and retests it, look for short positions and exit when the ribbon turns green or crosses the long moving average. ***DETAILS*** This indicator gives early reversal signals very well and waiting for the momentum ribbon to cross the long moving average helps to get you into positions when the market is ready to really move while filtering out some of the noise. The ribbon and background will change to green or red depending on whether it is currently bullish or bearish. There is also a label that changes colors and tells you if momentum is bullish or bearish and also whether the momentum ribbon is above or below the long moving average. Green or red circles will appear on the indicator when there is a bullish or bearish cross of the momentum ribbon and the long moving average. It includes alerts that trigger when momentum is turning bullish/bearish or when the momentum ribbon is crossing the long moving average. ***CUSTOMIZATION*** Each piece of this indicator can be customized to suit your preferences including the momentum source, length, smoothing length, short moving average length and long moving average length. You can also turn off the labels, signals and long moving average. All of these settings can be managed within the indicator settings input tab. ***MARKETS*** This indicator can be used as a signal on all markets, including stocks, crypto, futures and forex. ***TIMEFRAMES*** This Momentum Scalping & Swing Signals indicator can be used on all timeframes. ***TIPS*** Try using numerous indicators of ours on your chart so you can instantly see the bullish or bearish trend of multiple indicators in real time without having to analyze the data. Some of our favorites are Trend Friend Scalp & Swing Trade Signals, Volume Spike Scanner, Buy & Sell Pressure Volume Profile, and RSI Scalper in combination with this momentum indicator. They all have real time Bullish and Bearish labels as well so you can immediately understand each indicator's trend.
Pine Script®指標
由FriendOfTheTrend提供
5
Auto Support & Resistance With Wick Signals & Percentage GapsThis auto support and resistance indicator uses percentage deviations from the previous session close to calculate levels. It provides arrows as signals when it detects 2 wicks in the last 5 bars from a support or resistance level. Includes alerts for price crossing any level as well as real time percentage gaps from current price to the next closest support and resistance level. You also have the option to set up to 3 major levels of your own for any levels that are very important on longer timeframes that you want included. Those will show on the chart as well as within your percentage gap table with color coded background. All features can be customized or turned off to suit your preferences. SOURCE This indicator uses the previous session close as a source by default but can be adjusted to use the previous session high or the previous session low. I find the close setting to provide the most accurate levels. SESSION The default setting for the previous session used is the daily session but can be adjusted to use the daily, weekly, monthly, quarterly or yearly session. Use longer sessions when looking at longer time frame charts. SIGNALS The signals by default are set to only show an arrow if there have been 2 bullish or bearish wicks off of a support or resistance level in the last 5 bars. This can be changed to one bullish wick off of support and one bearish wick off of resistance or it can be set to give a signal anytime a bar crosses a support or resistance level. This can be controlled in the indicator settings. PERCENTAGE DEVIATION LEVELS The default percentage deviation is set to 1% but can and should be adjusted according to whatever ticker you are using. For example use .25% or .5% when looking at forex intraday charts since they are not as volatile as other markets. For leveraged etfs used 1% multiplied by the leverage on the etf, so for SQQQ use 3% as it is a 3x leveraged etf. When looking at longer timeframes or highly volatile charts, set the percentage deviation to 2%, 5%, 10%, etc. LINE COLORS The color of the lines will change from red to green depending on if the price is above or below that level. You can customize these colors in the settings. MAJOR LEVELS If you have major levels of support and resistance from longer timeframes and your own charting, you can add up to 3 major levels that will show on the chart as well as show the percentage gaps in the table. The label for each major level will be colored to match the color of the line on the chart individually. PERCENTAGE GAP TABLE The gap table will update live with percentages to go from current price to the next closest support and resistance levels so you don’t have to calculate them manually. The position of the percentage gap table can also be changed within the indicator settings. TURN FEATURES ON/OFF There are 3 toggle switches so you can easily turn on or off certain features such as: the support and resistance lines, the percentage gaps table and the arrow signals. LINE WIDTHS You can also set the line width of all levels and the line width of the starting level within the indicator settings. ***MARKETS*** This indicator can be used as a signal on all markets, including stocks, crypto, futures and forex. ***TIMEFRAMES*** This automatic support and resistance indicator can be used on all timeframes as long as there is enough data for the session used. ***TIPS*** Try using numerous indicators of ours on your chart so you can instantly see the bullish or bearish trend of multiple indicators in real time without having to analyze the data. Some of our favorites are our Volume Spike Scanner, Volume Profile, Momentum and Trend Friend in combination with this auto support and resistance indicator. They all have real time Bullish and Bearish labels as well so you can immediately understand each indicator's trend.
Pine Script®指標
由FriendOfTheTrend提供
18
Single Prints - Session Initial BalancesDisclaimer: Expose yourself to the knowledge of different trading methods. If you are unaware of what a Single Print is then do some research and broaden your knowledge. This indicator has only been tested on BTCUSDT Binance pair. This indicator is meant to be used on the 30 minute timeframe to highlight Single Prints. The calculations are base on 0000 UTC and what Single Prints are created during that day. Single Prints Single Prints are where prices moves to fast through an area (on a 30 minute timeframe), in the case of this indicator in $50 intervals, where the price has not yet cross back past, represented as orange lines. If you were viewing this on a Time Price Opportunity Chart (TPO) each $50 would be represented as a square with a letter in it. If price has only been through that area once, within that 24 hour period, then it is called a Single Print. If however the Single Print is on the lower wick of the candle it is called a Buying Tail and on the Upper Wick a Selling Tail. Single Prints leave low volume nodes with liquidity gaps, these inefficient moves tend to get filled, and we can seek trading opportunities once they get filled, or we can also enter before they get filled and use these single prints as targets. Single Prints are a sign of emotional buying or selling as very little time was spent at those levels and thus there is no value there. The endpoints of single print sections are considered to be potential support or resistance points and or get filled (like a CME gap). The above is only a very short summary, to understand Single Prints, Buying Tails and Selling Tails more please do your own research (DYOR). References: Trading Riot Volume Profile - Website TOROS TPO Charts Explained - Youtube Session Boxes Session Boxes are the high and low of that markets session before the new market session opens. I used the data from the website Trading Hours for the time input. White box – Start of day UTC 0000 to Market Close UTC 2000 Purple box – Asia Start UTC 0130 to London Start UTC 0700 Yellow box – London Start UTC 0700 to New York Start UTC 1330 Blue box – New York Start UTC 1330 to Market Close UTC 2000 Red box – Market Close UTC 2000 to End of day UTC 2359 References: Trading Hours - Website Initial Balance The Initial Balance is the market range between the high and low of the first hour of trading for the market. In the case of crypto when is the Initial Balance if it is 24/7. Context of Initial Balance: The Initial Balance is traditionally the range of prices transacted in the first hour of trade. Many regard the Initial Balance as a significant range because, especially for the index futures which are tied to the underlying stocks, orders entered overnight or before the open are typically executed prior to the end of the first hour of trade. Some use it to understand how the rest of the day may develop, while others use it as a span of time to avoid trading altogether because of its potential volatility. For this indicator I have coded the Initial Balance time as below: White Box - To appear for the first hour of the day 0000 to 0100 UTC . Purple Box - To appear for the first hour of the day 0130 to 0230 UTC . Yellow Box - To appear for the first hour of the day 0700 to 0800 UTC . Blue Box - To appear for the first hour of the day 1330 to 1430 UTC . Red Box - To appear for the first hour of the day 2000 to 2100 UTC . The diagram above shows some examples: How price (white arrows) retraces the single prints. How price (red arrows) uses the single prints as S/R. References: Not Hard Trading – Website My Pivots Initial Balance - Website Thanks go to: StackOverFlow Bjorn Mistiaen Trading View user mvs1231 Please message me if you have any feedback/questions. I am looking at developing this indicator further in the future.
Pine Script®指標
由Frien_dd-DisDev提供
35
PRIME - ShadoW ZoneZ with RSI LevelsIn This experimental study, we've taken RSI data, Volume Profile, and Trend analysis, combining them into one unique package that will allow a trader to analyze market trend lines and their proposed channels, trend momentum through candle color augmentation similar to "Pulse", and Visible Volume index price levels on chart for the current sequence. Below are explanations of each function within the system. The Semafor is used to spot future multi-level Supports and Resistance zones. It is also useful to spot HL or LL or HH or LH zones at different Depth settings. The red zones are the extreme places where the market has a higher chance of reversing while the green zones have the lowest setting with lower chances of the market reversal Automatic Trend Lines The indicator takes in 2 timeframes to detect High and Low values from which to draw the trend lines of each timeframe. As the values change with price movement, the lines are updated. They are color coded for uptrend and downtrend based on the direction of each individual line. Trend lines can be set up to color with only the default value on the configurations panel. - Toggle on/off Color Coded - Change Default, Uptrend, Downtrend color - Change Line Width - Change Line Style - Toggle on/off Line Extensions - Change Extended Line Width - Change Extended Line Style - Toggle On/Off labels for 7 data points of each timeframe Automatic Trend Sights This is a neat feature that may help you get a better feel for the direction the current movement is heading towards in correlation with the short or medium length timeframe trends. The sight draws a line from the middle vertical point of the trend coordinates towards the current price. They are toggled off by default but can be enabled in the configurations panel. - Toggle on/off sight on each timeframe - Change Width - Change Line Style Support & Resistance Levels, the main aim of the study. Level calculations are based on Relative Strength Index ( RSI ) threshold levels of oversold/overbought and bull/bear zones, where all threshold values are customizable through the user dialog box. Background of the levels can be colored optionally. RSI Weighted Colored Bars and/or Mark Overbought/Oversold Bars , Bar colors can be painted to better emphasis RSI values. Darker colors when the oscillator is in oversold/overbought zones, light colors when oscillator readings are below/above the bull/bear zone respectively, and remain unchanged otherwise. Besides the colors, with “Display RSI Overbought/Oversold Price Bars” option little triangle shapes can be plotted on top or bottom of the bars when RSI is in oversold/overbought zones . Disclaimer: Trading success is all about following your trading strategy and the indicators should fit within your trading strategy, and not to be traded upon solely The script is for informational and educational purposes only. Use of the script does not constitute professional and/or financial advice. You alone have the sole responsibility of evaluating the script output and risks associated with the use of the script. In exchange for using the script, you agree not to hold dgtrd TradingView user liable for any possible claim for damages arising from any decision you make based on use of the script
Pine Script®指標
由prim3associat3s提供
17
Mean Deviation Detector - Throw Out All Other IndicatorsI set out this morning to create a script that searches out price moves that went too far too fast relative to historical pricing, given that such situations often result in the most profitable trading opportunities. I came up with the mean deviation detector. This script should be used as a means of judging how far a price is trading, in percent terms, from it's "average trading zone". This is extremely helpful in a couple scenarios. First, it can be used to judge a move's volatility relative to it's previous volatility. Put simply, a 5% move in the stock of Coca Cola is a lot more meaningful than a 5% move in the stock of Tesla, and the detector puts moves into historical (visual) perspective. Second, the indicator can be used in real time as a means of determining when the chances of mean reversion are high or low. Extreme values are unsustainable and often lead to EITHER A.) price mean reversion or B.) time mean reversion. Put simply, prices either went too far and are due to fall back to a historical mean, or they need more time to digest a potentially new pricing zone. Without getting too deep into volume profile analysis, the MDD can be a simple way of telling that a stock has moved into an "air pocket", where prices will either come back to the previous volume node (price mean reversion) or set up shop in a new, uncharted area (time mean reversion). An extreme value doesn't always mean a trading opportunity, but it means that something interesting is happening in the stock / instrument. I use this indicator to help me trade covered calls. Lots of high yielding weekly opportunities are stocks that have moved too far too fast, and I like to use this indicator as a means of either a.) scooping up stocks that have gotten beat up from a historical mean perspective & have likely seen the risk already "beaten" out of them, or to b.) stay away from stocks that have a very high chance of price correcting lower. In situations where I say that the risk has been "beaten" out of something, it doesn't mean that the stock won't continue to fall, it simply means that the degree and acceleration of the fall has peaked and that risk premiums in selling options will / should easily pay for continued losses. In the event that it's a price correction and not a time correction, you also increase your bat rate because you get auto-liquidated at a max profit. It's a really valuable tool in my kit. You can also feel free to put a Keltner Chanel overlay onto the MDD to filter out noise, identify "extreme" values, and place mean reversion trades if you expect price mean reversion is likely, if you want to use this as the basis of a proper trading strategy. For a high extreme value, you could sell short term OTM call spreads, for example. The MDD is adaptable to your own trading style & preferences.
Pine Script®指標
由PropNotes提供
8
Initial Balance - (IB)Hello Traders, --->> Initial Balance (IB) which plays a very important role in Day Trading, that can be used as a referance area <<--- This indicator plots the 1 Hr IB high and low area that can be used as a tool for trading decision. Will be very helpful to the traders who has idea about Volume Profile trading. Just a note : If the IB is narrow compared to the prev day then one can expect a breakout, if IB is extended then the day might be oscillating inside the area only. nothing fancy :))) cheers, enjoy Sanjay Ramanathan
Pine Script®指標
由sanjay_ramanathan提供
25
Pulsepoint Multi-Session ORB Framework (Indicator Edition)Pulsepoint Multi-Session ORB Framework (Indicator Edition) Overview Pulsepoint ORB + PO3 Visual Framework is a visual-only indicator that combines a professional Opening Range (OR) visualization system with a multi-timeframe PO3 panel and bias dashboard. It is built for traders who want clean market structure context of Opening Range Breakout. Key Features ✅ Opening Range Box (High / Low / Midline) with optional target projections ✅ Multi-Timeframe PO3 Bars (e.g. 1H, 4H, 1D) plotted to the right of the chart ✅ Dynamic Coloring — bars automatically turn bullish or bearish based on open/close ✅ PO3 Bias Dashboard with real-time bias for each timeframe and EMA confluence (50, 100, 200) ✅ Session Presets & Custom OR Window (New York, London, Asia, Tokyo, or custom input) ✅ Live-Update Mode — choose between forming or closed HTF candles for your PO3 view ✅ Clean, Non-Intrusive Display — lightweight visual engine with optimized line/box count Inputs & Options Opening Range session preset or custom time window OR visuals toggle (show/hide range box and target levels) Custom colors for OR high/low/mid and PO3 up/down bars Right-side offset, body width, wick thickness, opacity controls Toggle equilibrium and open-line overlays on PO3 candles Enable or disable the bias dashboard Select whether PO3 bars use forming (real-time) or confirmed (closed) HTF candles How to Use Load the indicator on any chart and timeframe. Choose your OR session preset or custom time window. Adjust your three PO3 timeframes (e.g. 1H / 4H / 1D) to align with your style. Observe the color alignment between PO3 bars and EMA bias dashboard to assess directional confluence. Use as a contextual visual guide only — not for automatic entries or signals. Best Practices Use the PO3 framework to visualize price delivery, order flow, and multi-timeframe alignment. Combine with your preferred tools such as volume profile, VWAP, or liquidity zones. For strict HTF confirmation, disable “Use forming candles (live)” to color only after bar close. Always confirm any trade idea with independent confluence and proper risk management. Disclaimer This indicator is published for educational and research purposes only. It does not provide financial advice, buy/sell recommendations, or trade automation. Trading involves substantial risk and may not be suitable for all investors. Past performance does not guarantee future results. By using this script, you agree that Pulsepoint Trader / Jeanex assumes no responsibility for any profits or losses incurred. Version History v1.0 – Initial release (ORB Box + PO3 Bars + Bias Dashboard) v1.1 – Added dynamic PO3 coloring and live/closed HTF toggle v1.2 – Added timeframe labels under each PO3 bar v1.3 – UI refinements, dashboard polish, performance optimization Author Pulsepoint Trader © 2025 Professional Futures & Algorithmic Systems Built for clarity, structure, and discipline in trading.
Pine Script®指標
由jeanex030717提供
Smooth Cloud Trend Filter (20/50 EMA)The Smooth Cloud indicator visualizes market trend direction using two Exponential Moving Averages (EMAs): a Fast EMA (20-period) and a Slow EMA (50-period). The area between these averages forms a shaded cloud that changes color according to the trend bias: 🟢 Green Cloud: Fast EMA is above the Slow EMA → Bullish trend. 🔴 Red Cloud: Fast EMA is below the Slow EMA → Bearish trend. On this chart, the cloud remains green for most of the period, reflecting a strong and persistent uptrend. During minor pullbacks, the transitions stay smooth, showing that the trend filter reacts steadily without excessive noise. Price action consistently holds above the cloud from late September through early October, indicating sustained buyer control and bullish momentum. This view focuses solely on the trend structure provided by the Smooth Cloud. While other modules of the full system (such as the RSI Liquidity Spectrum and Zig Zag++ Volume Profile) add momentum and liquidity context, the Smooth Cloud alone highlights clear directional bias and trend strength. When the price trades above a green cloud, traders often look for long opportunities on pullbacks or RSI confirmations. A red cloud flip would signal a possible trend reversal or weakening momentum, suggesting short setups instead. The thickness of the cloud also offers visual insight — thicker clouds indicate stronger trend momentum, while thinner ones suggest consolidation or indecision.
Pine Script®指標
由Jaxon007提供
Project Pegasus RevenantDescription Project Pegasus Revenant is a reversal and liquidity-trap detection system combining a configurable fractal reversal engine with the SweepTrigger liquidity finder. It highlights potential structural turning points and stop-hunt scenarios directly on the chart. What’s unique Fractal Reversal Engine: Adjustable strictness (1 = loose, 5 = strict) to fit different market conditions. Signal Filtering: Minimum bar spacing to avoid clustering of false or repeated signals. SweepTrigger Add-on: Detects liquidity sweeps with wick-based rejection logic, auto-doji detection, and range-strength confirmation. Dual Signal Output: Circle markers for pure fractal reversals, triangles for sweep-based liquidity traps. Adaptive Filters: Customizable thresholds for body size, candle range, and sweep strength. How it works (technical) Fractals: A reversal fractal is confirmed when the high/low at position n is surrounded by lower/higher highs/lows across a configurable frontier. Signal confirmation: Once price trades back through the fractal level within a limited number of bars, a potential reversal is triggered. Bar filter: Signals require a minimum distance in bars to prevent noise. SweepTrigger logic: Wick comparison (upper vs lower) determines rejection direction. Doji and low-body candles are auto-filtered. Range check ensures the current candle exceeds a configurable multiple of the average range. Visuals: Green/Red circles = fractal reversals. Cyan/Purple triangles = liquidity sweep triggers. How to use Watch fractal signals to anticipate structural reversal points. Combine SweepTrigger signals with liquidity highs/lows for identifying stop hunts and fakeouts. Use as standalone reversal tool or as confirmation within a broader system (e.g., order blocks, volume profile, or market structure). Key settings Reversal Mode: 1–5 (controls strictness of fractals). SweepTrigger: On/off toggle, lookback window, body-size filter, range strength multiplier. Visuals: Shapes, sizes, and color-coded signals for clear separation between fractal and sweep triggers. Notes & limitations Works on all timeframes. Signals are reactive (based on confirmed bars), not predictive — no lookahead logic. Too strict settings may reduce signal frequency; too loose may increase noise. Disclaimer For educational and informational purposes only. Not financial advice.
Pine Script®指標
由Project_Pegasus提供
1
Strong Next-Candle Bias v1.0 [JopAlgo]Strong Next-Candle Bias v1.0 — fast, objective green/red for the very next bar What it does: Scores the current bar on five simple facts (breakout, body size, close location, trend, compression) and, if confidence ≥ your threshold, prints a Strong LONG or Strong SHORT for the next candle—with a clear confidence % label. What you’ll see on the chart Triangles: big teal ▲ below bar = Strong LONG; big red ▼ above bar = Strong SHORT. Confidence labels: “LONG 82%” / “SHORT 78%” printed on the signal bar. Context EMAs: EMA-Fast (teal) and EMA-Slow (orange) so you can see trend slope/stack. Top-right hint (last bar): quick text summary (e.g., “No strong signal (Long 64% | Short 58%)”). Why you got a signal (the scoring, plain English) Each bar earns points (0–100). If total ≥ Confidence threshold (default 75), you get a signal. Long points (+): Breakout up of the last breakoutLen bars’ high (excludes the forming bar to reduce noise). Real body ≥ min % of the bar (minBodyPct, default 70%) → shows intent. Close in top of the bar (topZonePct, default top 25%). Trend up (EMA-Fast > EMA-Slow). Compression before break (optional): recent range was tight (compLen, compMaxRangeP) → energy release. Short uses the mirrored checks (breakdown, body %, close in bottom, trend down, compression). You can see/tune the weights in code (w_breakout, w_body, w_zone, w_trend, w_comp). How to use it (simple playbook) Location first. Only act at real levels: Volume Profile v3.2 (VAH/VAL/POC/LVNs) or Anchored VWAP (session/weekly/event). Take the strong ones. Trade only when a Strong LONG/SHORT prints at your level and the EMAs agree (fast above slow for longs, below for shorts). Execute on the next bar. The signal is for the next candle. Enter on the retest/hold or break continuation, not mid-bar. Risk with structure. Stop goes beyond the level (or beyond signal bar’s extreme), not on indicator flips. First targets: POC/HVNs or the next obvious swing. Quality check (optional, recommended). If you use CVDv1 , prefer signals where Alignment = OK and Absorption ≠ red against your side. Settings that matter (and how to tune) Breakout lookback (breakoutLen, 20): higher = stricter break, fewer signals; lower = more signals, more noise. Trend EMAs (emaFastLen 25 / emaSlowLen 100): define your trend backbone. Intraday can use 9/34 or 21/55; swings 20/100. Min real-body % (minBodyPct, 70%): raise to demand stronger intent; lower to catch more setups. Close in top/bottom % (topZonePct, 25%): tighter zone = stricter, cleaner signals. Compression filter (useCompression, compLen 10, compMaxRangeP 3%): ON helps avoid random prints; raise % if your market is very volatile. Confidence threshold (thresholdPct, 75%): 70–75%: balanced (default). 80–85%: strict (fewer, higher-quality). 90%+: rare A+ only. Tip: Start with defaults for a week. Note which wins/loses. If you see false prints, raise threshold or increase body/zone requirements. Timeframe guide 1–5m (scalps): Consider 9/34 EMAs, breakoutLen 10–15, keep compression ON. Signals are frequent—only take them at Session AVWAP or VP edges. 15m–1H (intraday): Defaults work out of the box. 2H–4H (swing): 21/55 or 20/100 EMAs, breakoutLen 20–30. You’ll get fewer, cleaner signals. 1D+ (position): Use for daily closes near weekly levels; execute on a lower TF. Examples you’ll recognize Textbook continuation (long): Pullback to VAL/AVWAP, strong up bar (big body, closes in top), EMAs up, optional prior compression → Strong LONG 78–90%. Fresh breakout (short): Breakdown of a multi-day floor, EMAs down, body closes in bottom, RVOL↑ (if you track it) → Strong SHORT. Skip: Signal mid-range without a level; or against the EMAs (fast/slow disagreement). FAQs Does it repaint? No on closed bars. It deliberately excludes the live bar from breakout calc to reduce pre-close noise. Can I see “why” a bar scored high? Yes—each component is a visible behavior: break, big body, top/bottom close, EMA stack, pre-compression. Tune thresholds to your market. Is it only for crypto? Works on any instrument/timeframe; calibrate thresholds for volatility. Starter presets Intraday (15m/1H): 20 / EMAs 21 & 55 / body 70% / top 25% / compression ON / 75% threshold. Swing (4H): 20–30 / EMAs 20 & 100 / body 70–80% / top 20–25% / compression ON / 80% threshold. Short Disclaimer & License This tool is for education, not financial advice. Trading involves risk; test it first, size sensibly, and make decisions using your own judgment. Results can vary with data feeds and markets; no warranties are given.
Pine Script®指標
由JopAlgo提供
Rate of Change Indicator [JopAlgo] (ROCI)Rate of Change Indicator (ROCI) — see impulse early, skip the dead moves What it is (one line): ROCI tells you how fast price changed vs N bars ago , in percent. It’s a clean momentum gauge: Above 0 → price is higher than N bars ago (bullish momentum). Below 0 → price is lower than N bars ago (bearish momentum). Further from 0 → stronger impulse. The default +5 / −5 bands highlight strong thrust . Zero-line crosses flag momentum shifts. What you’ll see Blue line = ROCI. Orange dotted line = 0 (bull/bear divider). White dotted lines = ±Strong Momentum levels (default ±5). Green/red panel tint when ROCI lives above +5 or below −5. Read in 3 seconds: Which side of 0? How far? Growing or fading vs last bar? How to use it (simple playbook) Direction filter Trade longs only while ROCI > 0. Trade shorts only while ROCI < 0. Timing Breakouts: prefer breaks where ROCI pushes through +5/−5 and holds on the first retest. Pullbacks in trend: in an uptrend, let ROCI dip toward 0 and then turn back up → entry. (Mirror for downtrends.) Do less in chop If ROCI whips around near 0, you’re in balance. Only act at objective levels. Rule of thumb: Zero cross = heads-up. ±5 hold = go-with. Entries, exits, risk (use this, keep it tight) Continuation entry (trend): Bias up at your level (e.g., VAL/AVWAP). ROCI stays > 0 and turns up from a shallow dip → enter long. Stop: under structure/level. Targets: POC/HVNs or next swing. Breakout entry: Break through a level with ROCI > +5 (or < −5 for shorts). Enter on the retest that holds while ROCI remains outside the band. Invalidation: quick fall back inside the band and under 0 → stand down. Exit/trim: On longs, repeated lower ROCI peaks into your target (momentum fading) → take profits or tighten. Timeframe guide 1–5m (scalps) : ROC Period 10–20, Strong 6–10. Many signals; require level + confirmation. 15m–1H (intraday): ROC Period 14–34, Strong 4–7. Sweet spot. 2H–4H (swing): ROC Period 20–50, Strong 3–6. Cleaner legs, fewer flips. 1D+ (position): ROC Period 50–100, Strong 2–5. Use for backdrop; trigger on lower TF. Settings that actually matter (and how to tune) ROC Period (default 32) : lookback for comparison. Shorter = earlier signals, more noise. Longer = steadier bias, slower turns. Strong Momentum Threshold (default 5) : where you say “this is real thrust.” Pick it by history: scroll back, mark thrusts that ran, and note their typical ROCI. Set the band slightly inside that value so you see the start of good moves. Pattern cheatsheet Impulse leg : ROCI above 0 making higher peaks → trend leg in progress. Healthy pullback : ROCI dips toward 0 but doesn’t flip negative, then turns up → add/entry with trend. Weak breakout / likely fail: Price pokes level but ROCI stays near 0 or rolls over quickly. Divergence (lightweight): Price makes a higher high, ROCI peaks lower → momentum thinning; trail tight into HVNs. Best combos (kept simple) Volume Profile v3.2 : Use VAH/VAL/LVNs/POC for where. ROCI tells you if the break has juice. Anchored VWAP : Reclaim/reject AVWAP with ROCI on the correct side of 0 for higher quality. CVDv1 : Yes: ROCI thrust + CVD Alignment OK + no Absorption → higher odds the move sticks. No: ROCI thrust but Absorption red → don’t chase; wait for the fail/reclaim. (Optional add: RVOL—high participation + strong ROCI is the A+ combo for breaks.) Common mistakes this avoids Buying a breakout while ROCI sits near 0 (no impulse). Shorting a strong trend when ROCI is firmly > 0 (or > +5). Treating every zero cross as a trade (it’s a heads-up, not an entry by itself). Quick defaults to start ROC Period: 32 Strong Threshold: 5 Process: Level → ROCI side/strength → (optionally) CVD quality → Execute with structure-based risk Screenshots tip: show a level break where ROCI pushes through +5 and a pullback where ROCI turns up from ~0. Mini-disclaimer Educational tool, not financial advice. Test first, size sensibly, and always anchor decisions to levels, flow, and risk.
Pine Script®指標
由JopAlgo提供
Advanced Psychological Level-J-Algo📊 Advanced Psychological Level - Universal Market Support 📝 TradingView Publication Write-up Title: Advanced Psychological Level Short Description: Professional-grade psychological levels indicator with smart detection for ALL cryptocurrencies, dynamic ATR-based spacing, real-time distance calculations, and intelligent visibility management. Works seamlessly across Forex, Indices, and Crypto markets. 🎯 OVERVIEW Advanced Psychological Level is a sophisticated trading indicator that automatically identifies and displays critical psychological price levels where institutional orders cluster and market reversals occur. This advanced system goes beyond basic round number indicators by incorporating intelligent adaptive technology that automatically calibrates to any market and price range - from micro-cap cryptocurrencies to major indices, delivering institutional-grade analysis for retail traders. ✨ KEY FEATURES 🧠 Advanced Intelligence Engine The core of this indicator uses an advanced methodology combining: Smart market type detection Automatic level calibration Dynamic range optimization Real-time distance calculations 🌍 Universal Market Intelligence Forex: Pip-based levels (100, 250) with intraday precision (0.2, 0.5, 0.8) Indices/CFDs: Optimized whole number intervals with intelligent spacing Crypto: Revolutionary auto-detection that scales from $0.001 to $100,000+ Proprietary scaling for any cryptocurrency Intelligent level spacing based on logarithmic price magnitude Zero manual configuration needed 📈 Dynamic ATR-Based Levels (Optional) Levels that adapt to market volatility in real-time Advanced ATR calculations with customizable parameters Self-adjusting to market conditions Professional-grade volatility analysis 📊 Real-Time Distance Analytics Instant calculation of distance to key levels Percentage-based risk/reward computations Dual-directional target analysis Customizable display with professional formatting 🎨 Smart Visibility Management Intelligent Range Filtering: Shows only statistically relevant levels Performance Optimized: Advanced rendering prevents lag Dynamic Clutter Reduction: 70% cleaner charts with 100% effectiveness Configurable visibility parameters 🏷️ Intelligent Price Labels Smart label placement system Hierarchical level classification (Major/Standard/Mid) Professional typography and spacing Adaptive positioning based on chart scale 🔔 Advanced Alert System Multi-tier alerts for different level types Smart alert filtering to prevent spam Customizable alert conditions Real-time level breach detection ⚙️ CONFIGURATION GUIDE Core Settings Dynamic ATR Mode: Toggle adaptive volatility-based calculations ATR Parameters: Fine-tune sensitivity (Period & Multiplier) Visibility Range: Control smart display range (default 10%) Price Labels: Configure intelligent price display Level Controls Major Levels: Primary psychological barriers (250 pip/point) Standard Levels: Secondary levels (100 pip/point) Mid Levels: 50% calculations between majors (crypto-optimized) Intraday Levels: Micro-structure levels (Forex/Crypto only) Analytics Display Distance Table: Real-time calculation display Position Options: Four-corner placement Visual Parameters: Full color customization 📖 TRADING METHODOLOGY For Scalpers Activate intraday levels for micro-structure analysis Use distance table for precision entries Configure alerts for quick level breaks Optimize visibility to 5% for focused trading For Day Traders Focus on Major and Standard levels Enable smart labels for quick analysis Use distance calculations for targets Set visibility range to 10-15% For Swing Traders Enable ATR-based dynamic levels Use Major levels as primary targets Expand visibility range to 20% Add mid-levels for additional confluence For Crypto Traders Let auto-detection handle any coin automatically Enable mid-levels for volatile markets Use distance analytics for position sizing Monitor cluster zones for high-probability setups 💡 ADVANCED TECHNIQUES Confluence Trading: Combine with volume profile for high-probability zones Multi-Timeframe Analysis: Apply daily levels to intraday charts Risk Management: Use distance percentages for position sizing Smart Confluence: Identify where multiple levels align Adaptive Display: Automatically adjusts to your zoom level 🚀 THE ADVANCED ADVANTAGE vs. Basic Round Number Indicators ✅ Universal crypto support (not just BTC/ETH) ✅ Integrated distance calculations ✅ Smart visibility management ✅ ATR-based adaptive levels ✅ Professional framework vs. Other Psychological Level Tools ✅ Auto-calibration for any asset ✅ Real-time analytical display ✅ Optimized performance ✅ Complete customization ✅ Clean, uniform appearance 📊 MARKET APPLICATIONS Forex Trading Major pairs: 100/250 pip detection Intraday: Precision 20/50/80 pip levels Session-optimized performance Institutional-grade analysis Index Trading S&P 500: Smart 100/250 point levels NASDAQ: Thousand-level detection DAX: Optimized intervals Futures-ready calculations Crypto Trading Bitcoin: Auto-scaling to $1000/5000 levels Ethereum: Intelligent $100/250 detection Altcoins: Perfect scaling for any price Micro-caps: Works on $0.00001 tokens 🔬 TECHNICAL SPECIFICATIONS Version: v2.0 (Pine Script v6) Calculation Method: Real-time, non-repainting Performance: Optimized for all timeframes Memory Management: Advanced array handling Compatibility: All TradingView plans Support: Open-source with detailed comments ⚠️ KEY BENEFITS Zero Configuration: Works instantly on any chart Universal Coverage: One indicator for all markets Professional Display: Clean, institutional-quality visuals Real-Time Analytics: Instant risk/reward calculations Performance Optimized: No lag even on complex charts 🎯 IDEAL FOR ✅ Price action traders ✅ Institutional level analysis ✅ Smart money concepts ✅ Multi-timeframe strategies ✅ Risk management focused trading ✅ Any trader seeking reliable S/R levels 💬 FINAL NOTES This advanced indicator represents extensive development and real-world testing. It solves critical trading challenges: Automatic Calibration: No manual adjustment across markets Intelligent Filtering: Shows only relevant levels Real-Time Analytics: Instant distance and risk calculations Universal Compatibility: One solution for all markets The distance table alone transforms trading by providing instant context for risk/reward decisions. The smart crypto detection means you'll never need another psychological level indicator. Professional-grade tool, available free and open-source because quality trading tools should be accessible to everyone.
Pine Script®指標
由Jithin-Chellappan提供
EMA / WMA RibbonMomentum Flow Ribbon Unlock a clear, visual edge in identifying short-term momentum shifts with the Momentum Flow Ribbon. This indicator was born from a simple yet powerful concept: to visually represent the dynamic relationship between a fast-reacting Exponential Moving Average (EMA) and the smoother, more methodical Wilder's Moving Average (WMA). While both moving averages use the same length, their unique calculation methods cause them to separate and cross, creating a "ribbon" that provides an immediate and intuitive gauge of market momentum. This tool is designed for the disciplined trader who values clean charts and actionable signals, helping you to execute your strategies with greater confidence and precision. How It Works The script plots an EMA and a Wilder's Moving Average (referred to as rma in Pine Script) of the same length. The space between these two lines is then filled with a colored ribbon: Bullish Green/Teal: The ribbon turns bullish when the faster EMA crosses above the slower Wilder's MA, indicating that short-term momentum is strengthening to the upside. Bearish Red: The ribbon turns bearish when the EMA crosses below the Wilder's MA, signaling that short-term momentum is shifting to the downside. The inherent "lag" of the Wilder's MA, a feature designed by J. Welles Wilder Jr. himself, acts as a steady baseline against which the more sensitive EMA can be measured. The result is a simple, zero-lag visual that filters out insignificant noise and highlights meaningful changes in trend direction. Key Features Customizable Length and Source: Easily adjust the moving average length and price source (close, hl2, etc.) to fit your specific trading style and the instrument you are trading, from futures like MES and MNQ to cryptocurrencies and forex. Customizable Colors: Tailor the ribbon's bullish and bearish colors to match your personal chart aesthetic. Built-in Alerts: The script includes pre-configured alerts for both bullish (EMA crosses above WMA) and bearish (EMA crosses below WMA) signals. Never miss a potential momentum shift again. Clean & Lightweight: No clutter. Just a simple, effective ribbon that integrates seamlessly into any trading system. Practical Application for the Discerning Trader For a futures trader, timing is everything. This ribbon is not just another indicator; it's a tool for confirmation. Imagine you've identified a key level—a Volume Profile POC, the previous day's low, or a critical accumulation zone. As price approaches this level pre-London session, you're watching for a sign of institutional activity. A flip in the ribbon's color at that precise moment can provide the powerful confirmation you need to enter a trade, trusting that you are aligning with the building liquidity and momentum heading into the New York open. This is a tool for those who aspire to greatness in their trading—who understand that the edge is found not in complexity, but in the flawless execution of a simple, well-defined plan. Add the Momentum Flow Ribbon to your chart and start seeing momentum in a clearer light.
Pine Script®指標
由rick84etter提供
FX Strike — EMAs + ATR Trailing StopsThe FX Strike Overlay combines three key moving averages with ATR-based trailing stops to create a clear, rule-based trading framework. EMAs (200, 50, 20): Define macro trend, active trend, and entry trigger. ATR Trailing Stop: Adapts dynamically to volatility to manage stop-loss placement and trend exits. Pullback Zone Shading (20↔50): Highlights high-probability continuation areas. Flip Markers & Alerts: Optional signals when price crosses the ATR trail or reclaims the 20 EMA in trend. How to Use: Follow the 200/50 EMA alignment for trend bias. Look for pullbacks to the 50 EMA and reclaims of the 20 EMA for entries. Place stops at the ATR trail line, and let it manage exits dynamically. Use with Volume Profile or support/resistance levels for profit targets. This tool was designed with a clean black/gold theme for traders who value simplicity, discipline, and clarity.
Pine Script®指標
由GordonClark02提供